How to install full height turnstile | STXtek.com

Installing a full height turnstile requires expertise and knowledge of construction and electrical wiring. It is recommended that you hire a professional installer to ensure proper installation and functionality of the turnstile.

 

Here are some general steps that may be involved in the installation of a full height turnstile:

 

Determine the location: Choose a suitable location for the turnstile. The location should be easily accessible and have adequate space for the turnstile to operate smoothly.

 

Prepare the site: The site should be prepared by removing any obstacles and ensuring a level surface for the turnstile to be installed on.

 

Install the baseplate: The baseplate should be installed and secured to the floor using bolts and anchors.

 

Install the frame: The turnstile frame should be installed on top of the baseplate, making sure that it is level and securely bolted to the baseplate.

 

Install the rotor assembly: The rotor assembly should be installed in the frame, ensuring that it is level and securely attached to the frame.

 

Install the motor and control panel: The motor and control panel should be installed according to the manufacturer's instructions, making sure that all wiring is properly connected.

 

Test the turnstile: The turnstile should be tested to ensure that it is functioning properly and that all safety features are working as intended.

 

Finish the installation: Once the turnstile has been tested and is functioning properly, any finishing touches such as painting or signage can be added.

 

Again, it is recommended that you hire a professional installer to ensure that the installation is done correctly and that the turnstile is safe and functional.

For more turnstiles option and news, please visit STXtek official website: https://www.stxtek.com/